Pocket Manual & FAQs

Step-by-step instructions for setup, operation, and maintenance. Follow these directions to ensure safe use, optimal performance, and long-lasting enjoyment of your device.

Charging the Device

  1. Use the included USB-C cable to charge.
  2. Connect to a wall adapter or USB port.
  3. Charging port is at the bottom of the device.

Loading Concentrates

  1. Power on the device.
  2. Lift the tethered cap to access the chamber.
  3. Place a small amount of wax using a dab tool.
  4. Insert the included glass stir-pearl for even heat distribution.

Session Timer & Preheat

  1. Set session duration (15–60 seconds) by pressing the button 4 times, then adjust with single presses.
  2. Double-press the power button to start preheat.
  3. Device vibrates when ready to use.

Maintenance & Cleaning

  1. Turn off device before cleaning.
  2. Remove any residue from the chamber.
  3. Use a dry cotton swab to clean contacts; wipe body with a dry cloth.

Specifications & Features

  1. 360° Ceramic Heating Chamber (Cloud-3)
  2. Precision Temperature Control (400–580°F)
  3. Glass stir-pearl included for even heating
  4. Single-button operation
  5. OLED display & haptic feedback
  6. Compact alloy body with tethered cap

Powering On / Off

  1. Press the power button 5 times quickly to turn on/off.
  2. Ensure the battery is fully charged before first use.

Adjusting Temperature

  1. Press the button 3 times rapidly to enter temperature mode.
  2. Press once per increment to adjust temperature.
  3. Release button to lock in the setting.

Starting a Session

  1. Double-press the button to start preheat.
  2. Device vibrates when the target temperature is reached.
  3. Inhale gently through the mouthpiece.
  4. Session ends automatically or can be stopped early by double-pressing.

Display & Feedback

  1. OLED shows temperature, battery level, and session time.
  2. Vibrations signal on/off, preheat start, ready-to-use, and session end.
  3. Keep the device dry to prevent residue buildup.

Tips & Recommendations

  1. Use small amounts of concentrate to maintain airflow.
  2. Stir with the stir-pearl for even vaporization.
  3. Clean chamber regularly to preserve flavor.
  4. Only charge with the supplied USB-C cable.
  5. Allow the device to fully cool before reloading or charging.
  6. Store dry and clean to ensure longevity.

FAQs

Find answers to common questions about setup, usage, troubleshooting, and care.
Why does my Pocket show “NO ATOMIZER” or refuse to heat?

Most often this is caused by a poor connection between the chamber (atomizer) and the battery contacts. Cleaning both contact points thoroughly with a dry swab or isopropyl‑alcohol swab — and ensuring the chamber is seated firmly — often resolves the issue.
How much concentrate should I load? I’m getting leaks or oil spilling during use.

Overloading tends to cause residue or oil to spill out when heating. Many users recommend starting with a small, “rice‑grain sized” amount and using the included stir‑pearl or gentle draws. This reduces waste and helps vaporize more evenly.
Does the battery really last as advertised / how many sessions per charge?

Under moderate use (mid-temperature & standard session length) many reviewers report being able to get multiple sessions per full charge — roughly 10–15 sessions before recharge is recommended.
How do I get the best flavor or cloud production?

For better flavor: load a small amount, keep temperature on the lower side. For bigger clouds: preheat briefly, use the stir‑pearl, and draw longer. The 360° ceramic heating + spiral airflow + pearls are engineered to maximize extraction and minimize hot‑spots or uneven vaporization.
How should I clean and maintain the device to avoid issues over time?

After each session (once cool), wipe the chamber with a dry cotton swab to remove residue. Periodically use a Q‑tip with isopropyl alcohol to clean contacts and chamber interior — making sure everything is dry before reassembling. This prevents build‑up that could interfere with heating or connection.

View Pocket

Visit Pocket page to learn more about its features and capabilities.
View Product