Celestial 2 Manual & FAQs

Step-by-step instructions for setup, operation, and maintenance. Follow these directions to ensure safe use, optimal performance, and long-lasting enjoyment of your device.

Charging the Celestial 2

  1. Use the included 4-ft USB-C cable that comes with the device.
  2. Plug the USB-C cable into a wall adapter, then connect it to a wall outlet.
  3. Connect the other end to the Celestial 2 to begin charging.
  4. Compatible with computers and other USB ports for charging when an outlet isn’t available.
  5. Optional: The Celestial 2 also supports wireless charging using the Yocan Black Celestial Charger.

Turning the Device On/Off

  1. Fully charge before first use for best performance.
  2. Press the power button 5 times quickly to turn the device on.
  3. Press the same button 5 times again to turn it off.
  4. The power button is the circular front-facing button on the device body.

Loading Concentrates

  1. Remove the glass bubbler to expose the coil.
  2. Add a small amount of wax concentrate directly onto the TGT Coil or Cloud2 Chamber.
  3. Reattach the glass bubbler securely before use.

Changing the Coil

  1. Remove the magnetic glass bubbler to access the coil.
  2. Allow the coil to cool completely, then twist counterclockwise to loosen and remove it.
  3. Insert your preferred coil (TGT or Cloud2) into the threaded connector.
  4. Twist clockwise until you feel light resistance.
  5. Do not overtighten, as this can loosen or damage the threading.

Selecting a Temperature Level

  1. Ensure the Celestial 2 is powered on.
  2. Press the power button 3 times to cycle through temp options.
  3. Stop at the level you prefer—device will hold your selection.

Temp settings:

  • 490°F (254°C)
  • 510°F (265°C)
  • 530°F (276°C)
  • 545°F (285°C)

Maintenance & Cleaning

  1. Remove the coil before cleaning.
  2. Power off the device (5 rapid clicks).
  3. Clean coil contacts with a dry cotton swab.
  4. Wipe the device body with a dry paper towel.
  5. Soak the glass bubbler in lukewarm water, then gently brush for deeper cleaning.
  6. Always use the included charging cable to avoid damaging the battery.
  7. Charge the device before long-term storage to maintain battery health.

FAQs

Find answers to common questions about setup, usage, troubleshooting, and care.
How many sessions per charge can I expect from Celestial 2?

With its 2500 mAh battery, many users report extended battery life — the manufacturer claims you can get up to around 36 sessions per full charge under typical use.
What temperature settings does Celestial 2 offer, and how do I choose them?

Celestial 2 offers four preset temperature levels: 490°F, 510°F, 530°F, and 545°F. You can switch between them using the power button (3 presses) while the device is on, then release to select.
Do I need to clean it after every use? What’s the maintenance like?

For best performance and flavor, it’s recommended to clean after every few uses — remove the coil, wipe contacts with a dry swab, rinse or gently clean the glass bubbler (lukewarm water + brush), and ensure all parts are dry before reassembly.
What heating chamber does it use, and does it run hot or clean?

The device uses the 360° ceramic heating system (Cloud² chamber) or TGT coil — both designed for regulated, even heating that vaporizes concentrates thoroughly without burning, preserving flavor and preventing combustion.
Can I use Celestial 2 while it’s charging ( passthrough charging ) or should I wait until charged?

Yes — the Celestial 2 supports USB-C charging for recharging the battery. Many similar models support pass-through charging (use while plugged in), though to maximize battery health it’s generally best to use original chargers and avoid overcharging.

View Celestial 2

Visit Celestial 2 page to learn more about its features and capabilities.
View Product